SMD Capacitors | WIMA

SMD-PET Data Sheet

SMD-PPS Data Sheet

WIMA SMD capacitors in size codes 1812, 2220, 2824, 4030, 5040 and 6054, capacitance values from 0.01 µF through 6.8 µF and voltage ranges from 63 VDC through 1000 VDC cover nearly the entire application range of conventional through hole plastic film capacitors.

All WIMA SMD series are produced with the proven box technology, showing the following advantages in comparison with non-encapsulated or moulded SMD capacitor versions:

Safe protection of the capacitor element against mechanical and thermal stresses during processing and operation.
No danger of internal cracks or tearing away of the contacts due to construction elasticity.
No danger of delamination due to solder plates over the capacitor's entire end surfaces.
Flame-retardant plastic case in accordance with UL 94 V-0.

These features and the wide capacitance range enable WIMA SMDs to substitute other capacitor technologies and become standard components in electronic developments.

WIMA Complete Product Line

SMD Capacitors Size codes 1812-6054 and capacitance values from 0.01 µF through 6.8 µF with PET and PPS dielectric.
Capacitors in PCM 2.5 mm WIMA subminiature capacitors are available in metallized or film/foil version with capacitances up to 1.0 µF.
Capacitors in PCM 5 mm With capacitances up to 10 µF and voltage ranges up to 1000 VDC the WIMA capacitors in PCM 5 mm covers a wide field of applications.
Film/Foil Capacitors in PCM 7.5 - 15 mm Polyester and Polypropylene capacitors for pulse applications with capacitances up to 0.22 µF and voltage ranges up to 1000 VDC.
Metallized Capacitors in PCM 7.5 - 37.5 mm Self-healing Polyester and Polypropylene capacitors up to 220 µF with voltage ranges up to 2000 VDC.
Pulse Capacitors Designed for extremely high pulse loads this reliable, self-healing Polypropylene capacitors are available with voltage ranges up to 6000 VDC.
RFI Capacitors Interference suppression capacitors with Polypropylene or Metallized Paper dielectric classes X2, X1 or Y2.
Snubber Capacitors Developed for high-power converter technology, WIMA Polypropylene snubber capacitors are available in manifold connecting configurations.
GTO Capacitors WIMA Polypropylene GTO capacitors are especially designed to attenuate voltage spikes on GTO-Thyristors and IGBT.
DC-Link Capacitors Intermediate circuit capacitors in manifold connecting configurations with capacitances up to 4500 µF and voltage ranges up to 1600 VDC for applications in high-power converter technology.
SuperCapacitors Double-layer storage capacitors with highest capacitance values in the Farad range suitable for support, protection or replacement of batteries in traction systems.