DC-Link Intermediate Circuit Capacitors | WIMA

DC-Link MKP 4 Data Sheet

DC-Link MKP 5 Data Sheet

DC-Link MKP 6 Data Sheet

DC-Link HC Data Sheet

WIMA DC-Link capacitors are especially designed for applications in high power converter technology where due to increasing electrical requirements they are more and more substituting electrolytic capacitors. Manufactured with a low loss polypropylene dielectric they show a higher current carrying capability as well as lower dissipation/self-heating at high frequencies compared to electrolytic capacitors. Further outstanding features are, e.g.:

Very high capacitance/volume ratio
High voltage rating per component
Very low dissipation factor (ESR)
Very high insulation resistance
Excellent self-healing properties
Long life expectancy
Non-polar construction
Particularly reliable contact configuration
High shock and vibration resistance
Outstanding mechanical stability

WIMA DC-LINK MKP 4 capacitors with rectangular case are available with capacitance values from 2 µF through 150 µF and with rated voltages from 600 VDC through 1300 VDC. For mounting purposes 2-pin and 4-pin versions are possible.

WIMA DC-LINK MKP 5 capacitors in cylindrical plastic case are available with capacitances from 16 µF through 260 µF and with rated voltages of 500 VDC, 700 VDC, 900 VDC, 1100 VDC and 1300 VDC. They are provided with tinned wire terminations for PCB mounting.

WIMA DC-LINK MKP 6 capacitors have a cylindrical aluminium case. They are available with capacitances from 165 µF through 1560 µF and with rated voltages of 600 VDC, 700 VDC, 900 VDC, 1100 VDC, 1300 VDC and 1500 VDC. For bus bar mounting they are designed with M6 screw terminations and M12 screw bolt.

Based on their internal construction and their non-polarized connection configuration WIMA DC-LINK HC capacitors can for example be connected as one 4500 µF/400 VDC, as two 2250 µF/400 VDC or alternatively as one 1125 µF/800 VDC component. Depending on the case size and wiring version values between 85 µF/1600 VDC and 4500 µF/400 VDC are available. Customized solutions can be realized on demand.

WIMA Complete Product Line

SMD Capacitors Size codes 1812-6054 and capacitance values from 0.01 µF through 6.8 µF with PET and PPS dielectric.
Capacitors in PCM 2.5 mm WIMA subminiature capacitors are available in metallized or film/foil version with capacitances up to 1.0 µF.
Capacitors in PCM 5 mm With capacitances up to 10 µF and voltage ranges up to 1000 VDC the WIMA capacitors in PCM 5 mm covers a wide field of applications.
Film/Foil Capacitors in PCM 7.5 - 15 mm Polyester and Polypropylene capacitors for pulse applications with capacitances up to 0.22 µF and voltage ranges up to 1000 VDC.
Metallized Capacitors in PCM 7.5 - 37.5 mm Self-healing Polyester and Polypropylene capacitors up to 220 µF with voltage ranges up to 2000 VDC.
Pulse Capacitors Designed for extremely high pulse loads this reliable, self-healing Polypropylene capacitors are available with voltage ranges up to 6000 VDC.
RFI Capacitors Interference suppression capacitors with Polypropylene or Metallized Paper dielectric classes X2, X1 or Y2.
Snubber Capacitors Developed for high-power converter technology, WIMA Polypropylene snubber capacitors are available in manifold connecting configurations.
GTO Capacitors WIMA Polypropylene GTO capacitors are especially designed to attenuate voltage spikes on GTO-Thyristors and IGBT.
DC-Link Capacitors Intermediate circuit capacitors in manifold connecting configurations with capacitances up to 4500 µF and voltage ranges up to 1600 VDC for applications in high-power converter technology.
SuperCapacitors Double-layer storage capacitors with highest capacitance values in the Farad range suitable for support, protection or replacement of batteries in traction systems.